CyberPower Systems 10amp Switched Automatic Transfer Switch ATS with PDU and LCD 1RU

$769.00 Inc GST

PDU15SWHVIEC12ATNET

CyberPower Automatic Transfer Switches equipped with dual input sources provide reliable redundant power to single-corded network devices. 
The units automatically transfer power from selected source to the other power source to maintain continuous output without interruption. This will ensure the highest level of protection to equipment that does not have redundant power supply.
Configurable threshold for input voltage and device load allows extensive application scenarios. With a front digital multifunction LCD readout for real-time power monitoring and local management, you can conveniently monitor and configure the load to avoid overloads and efficiently balance load levels.
Via the SNMP/HTTP protocol through Web, SNMP, and Telnet, the ATS are able to switch outlets off and on to reboot connected equipment remotely.

General

Type Switched
Phase Single Phase

Input

Voltage 200Vac – 240Vac
Frequency 50/60Hz
Maximum Input Current 10A
Plug Type IEC C14
Plug Style Socket
Cord Length 10′

Output

Nominal Output Voltage 200Vac – 240Vac
Overload Protection (Each Bank) x
Outlets – # of Banks 1
Outlets – Total 12
Outlets – Front 0
Outlets – Rear 12
Outlet Type (12) IEC C13
Controllable Outlets 12
Transfer Time 8-12 ms (typical)

Communications

Connectivity RJ45, Environmental (RJ45), Serial (RJ45)
LCD Readout KW, Voltage, Amperage, Network Info, HW/FW Version
LED Indicators Input, Output Load, Tx/Rx, LINK, Outlets
SNMP / HTTP Remote Monitoring TCP/IP, UDP, DHCP, SNMP v1/v3, HTTP(s),Telnet, SSH, SSL, NTP, SMTP, IPv4, IPv6

Physical

Standard Form Factor 1U Horizontal
Form Factors Supported Horizontal rack mount
Style Horizontal rack mount
Enclosure Construction Steel
Cord Retention Tray/Cord Organizers Yes
External Site Ground Pin Yes
Adjustable Mounting Brackets 1 set

Physical Size

Dimensions (WxHxD) (in.) 17.05 x 1.75 x 9.3
Dimensions (WxHxD) (mm.) 433 x 44 x 236
Weight (lbs.) 8.8
Weight (kg.) 4
Installed Rack Height 1U

Shipping Dimensions

Dimensions (WxHxD) (in.) 21.65 x 4.9 x 16.5
Dimensions (WxHxD) (mm.) 550 x 125 x 420
Weight (lbs.) 14.52
Weight (kg.) 6.6

Environmental

Operating Temperature 32 °F to 113°F / 0 °C to 45 °C
Operating Humidity 0% – 95% non-condensing
Storage Temperature 5 °F to 131°F / -15°C to 55 °C
Maximum Operating Elevation 13,100 feet/4,000 meters
Maximum Storage Elevation 50,000 feet / 15,000 meters

Certifications

Certifications UL60950_1 , CSA C22.2, FCC Class A, CE
RoHS RoHS Compliant

Warranty

Product Warranty 3-Year Advanced Replacement
SKU: PDU15SWHVIEC12ATNET Category:

Description

PDU15SWHVIEC12ATNET

CyberPower Automatic Transfer Switches equipped with dual input sources provide reliable redundant power to single-corded network devices. 
The units automatically transfer power from selected source to the other power source to maintain continuous output without interruption. This will ensure the highest level of protection to equipment that does not have redundant power supply.
Configurable threshold for input voltage and device load allows extensive application scenarios. With a front digital multifunction LCD readout for real-time power monitoring and local management, you can conveniently monitor and configure the load to avoid overloads and efficiently balance load levels.
Via the SNMP/HTTP protocol through Web, SNMP, and Telnet, the ATS are able to switch outlets off and on to reboot connected equipment remotely.